APS Series

APS - 10-20 kN Electric vibratory plates
Find a Dealer

APS - 10-20 kN Electric vibratory plates: Excellent handling and maneuverability on soil and asphalt

The APS series is distinguished by its outstanding handling capabilities. Moving and turning these vibratory plates on fresh asphalt is unsurpassed in comfort and produces clean finishes with no marks. Even clean finishes at curbs are easy to produce due to the angular side edges of the base plate. The guide handle responds precisely to steering movements while still achieving low hand-arm vibrations of less than 5 m/s², which makes long and comfortable working conditions possible. Because of the direct drive, the APS series does not require V-belts and is therefore maintenance-free.

Battery driven machines start by the push of a button

Starts with a push of a button

  • The battery can be started easily and reliably with the push of a button, even at low temperatures or at altitudes.
  • Starting with the push of a button is much more convenient than starting with pulling a cable.
Electric motor battery-operated plate AP2560e

Maintenance-free electric motor

  • Maintenance work is completely eliminated compared to combustion engines For example, there are no problems with dirt accumulation or inferior oil. This significantly reduces maintenance effort and costs over the long service life of the machine.
Battery change battery-operated plate AP1840e AP1850e

Removable battery

  • The battery can be easily removed without tools and used in another machine. This makes it quick and easy to use a single battery for serveral machines on the construction site.
  • It is possible to swap a discharged battery for a charged one very easily and quickly on the construction site.
Handle Single Direction Vibratory Plate

Base plate optimized for perfect work results

  • The side edges of the base plate are angled in front and rounded in the rear for precise work along curbs. The beveled and narrowing shape prevents tracks from being created in the fresh asphalt when turning the machine. This shape makes it easy to produce high-quality, smooth asphalt surfaces.
APS - 10-20 kN Electric vibratory plates

Excellent turning ability and control with simultaneously low HAV

  • The guide handle responds precisely to steering movements while simultaneously reducing hand-arm vibrations to the greatest extent possible. This way, the vibratory plate can be controlled comfortably with little effort.
  • Turning and steering movements are transferred very easily to the machine. This makes work quick and comfortable.

More Features

Illustration ecology zero emission

No exhaust emissions

  • The operator is not exposed to any exhaust emissions. Therefore, the machine can be used without restrictions in trenches, tunnels and interior spaces. For the operator, work becomes more pleasant and healthy than with fuel-operated machines.
  • Because the machines are emission-free, new applications open up in areas with special requirements for environmental friendliness.
Lithium-ion battery BP1000 studio image back side

Long running time with one battery charge

  • One battery charge is usually enough for the typical tasks of a full workday. As a result, the work process doesn't have to be interrupted by recharging and not replacement battery is required.
Single Direction Vibratory Plate

Constant power output

  • The machine performs consistently throughout the entire discharging phase of the battery- from the first to the last minute of work.
Illustration economic efficiency

Low energy costs

  • As electric power is much cheaper than fuel, very low operating costs are incurred. The result is substantial savings over the entire long service life of the machine.
Handle Single Direction Vibratory Plate

Large water tank (2.11 gal) with efficient sprinkler system

  • The water tank is permanently mounted on the unit and cannot be removed as is the large hinged lid with slot. This means filling the tank with water is possible even without opening the lid.
  • The sprinkler system offers reliable water coverage over the entire width of the base plate without wasting water. As a result, refilling is needed less often.
  • The water volume can be regulated as required via a large knob within easy reach.
Illustration low hand-arm vibrations (HAV)

Low hand-arm vibration

  • The low hand-arm vibration values (< 5 m/s²) enable comfortable work.
  • The machine contributes only a small amount to the operator’s daily vibration exposure. He may work a full eight hour with the unit
  • The utilization of the machine and the productivity of the employees are increased.
Battery-driven single direction vibratory plate

Wheel set quickly ready for use

  • If the wheel set is folded down, the guide handle automatically locks and the machine can be moved immediately. Conversely, the guide handle is automatically unlocked when you fold up the wheel set. This ensures smooth procedures on the construction site.
APS - 10-20 kN Electric vibratory plates

Base plate made of nodular cast iron (GJS700)

  • The base plate consists of very sturdy, durable material, thus reaching a long service life.
  • The high grade material of the base plate contributes to producing perfect surface quality in asphalt compaction.
California Proposition 65 Warning

Product Inquiry

*Mandatory field