ET20

Tracked Conventional Excavator ET20

Tracked Conventional Excavator ET20: Stability meets specially developed boom

The ET20 compact excavator not only shows what it can do with its powerful drive system, but also offers a variety of innovative features and options. The ET20 achieves excellent excavation results and stability thanks to its specially developed longer travel gear and boom. The hydraulically pilot-operated drive pedals allow the excavator to be controlled precisely with the feet.

Tracked Conventional Excavator ET20

Hydraulic telescopic travel gear with dozer blade extension

  • The hydraulically telescoped travel gear with a max. outer width of 1300 mm gives stability. In no time, it can be retracted to a width of 990 mm. With the foldable dozer blade extension, this makes individual adjustment to the job site conditions possible. Meanwhile, the extension elements are always connected to the machine and thus do not get lost.
Easy backfilling of a construction site with ET20 VDS

VDS Vertical Digging System

  • The vertical digging system compensates for slopes of up to 15 degrees, making it possible to vertically excavate on a slope. This is not only ergonomic for the operator, but it also saves time and also means less excavated material.
  • Up to 25 percent material and time savings when excavating and filling. Safe working and higher stability in sloping spaces.
  • The same swing power over 360 degrees allows fatigue-free work with the seat position remaining the same.
Tracked Conventional Excavator ET20

Comfortable, fully glazed cab

  • The large, fully glazed and tiltable cabin with roof window offers the operator an optimal 360° visibility of his work area. This gives the operator a good view of his working area, colleagues and any dangers. Meanwhile, available despite this.
  • It can be easily disassembled for service and repair work. All hydraulic functions of the excavator meanwhile remain available despite this.
ET20 in action

Innovative front windshield system

  • The windshields can be adjusted to any condition on the construction site. Closed, they are water- and windproof. The upper front window can be pushed under the cabin roof. The lower pane serves as splash protection. The lower windshield slides behind the upper window, making it ideal for talking with colleagues. If necessary, both windows are pushed below the cabin roof, where they are stored safely.
  • The two-part front window allows for optimal ventilation in the cabin in any weather. In addition, it makes it easier to communicate with the operator. A separate removal and storage of the window is a thing of the past.
  • Significantly lower risk of damage or loss; higher level of operating comfort
Tracked Conventional Excavator ET20

Easy service and maintenance access

  • Easy service, thanks to wide-opening engine hood, allows easy access to all parts.
  • No disassembly of heavy parts necessary, additional easily replaceable wear parts.
  • Quick and unrestricted access. Hydraulic and engine oil filters, air filter, water separator and also the tank filler neck are ideally accessible. Low service costs.

More Features

Tracked Conventional Excavator ET20

Second cabin door for entry and exit on both sides

  • The excavator cabin can be optionally equipped with a second driver’s door. This makes getting in and out easier, especially in narrow or sloped spaces.
Tracked Conventional Excavator ET20

Hydraulically pilot-controlled travel pedals

  • The hydraulically pilot-controlled travel pedals provide comfortable and precise control without mechanical wear. Driving with foot control leaves the hands free for other functions. This saves time and increases operating comfort.
Illustration mini excavator on car trailer

Easy transportation by car trailer

  • With the car trailer to the next construction site? No problem - the low weight enables transportation including attachment tools using a 3.5 t trailer.
Tracked Conventional Excavator ET20

Hydraulic joystick operation

  • The ergonomic and sturdy joysticks, which work completely proportionally, expand the functions and possibilities for controlling the excavator. The operator can carry out movements more precisely and work with increased concentration.
Tracked Conventional Excavator ET20

2 travel speeds

  • The excavator is equipped with a second travel speed level as standard. This allows him to quickly change position on the construction site and\nsave valuable time.
Easy backfilling of a construction site with ET20 VDS

Compact dimensions

  • High safety during transportation, cost and time savings, high flexibility. The excavator scores points with its low entry height, small external dimensions thanks to intelligent component arrangement and ensures greater stability thanks to its low center of gravity.
  • Whether for transportation or in confined spaces: Thanks to its compact design, the excavator can be easily transported to the next job site. And on the construction site, the machine can get anywhere quickly and easily, even in confined spaces - for high efficiency in every application.
Tracked Conventional Excavator ET20

Numerous attachments

  • Thanks to the optional additional control circuits, the excavator can be equipped with a wide range of attachments. This allows you to increase your application options and thus the utilization of the machine in no time at all.
Tracked Conventional Excavator ET20

2 lifting eyes on the roof

  • The machine can be moved very easily and without any problems on the construction site using a crane. Loading and unloading the excavator from the truck can also be done quickly.
Tracked Conventional Excavator ET20

Thermal resistance

  • The excavator can work under full load up to an ambient temperature of 45°C/113°F. The stable temperature level results in a longer service life for the hydraulic components and increases productivity.
  • Lower temperature level - longer life, work without loss of performance.
Tracked Conventional Excavator ET20

Powerful drive system

  • Thanks to the high performance of the drive system, the maximum power of the excavator is available at every point of operation. This brings up to 30% higher power for an even better performance.
Tracked Conventional Excavator ET20

Laterally raised cast bumper

  • The extremely sturdy raised bumper made of massive cast iron prevents damage to the rear, thus contributing to the long service life of the machine. Along with the high quality, it is also visually impressive as a modern design element.

Contact us

* Mandatory fields