Telehandler TH412e: Electric, environmentally-friendly, and powerful

100 % connectible differential lock

• The connectible 100% differential lock provides maximum traction and thrusting power when needed. It also keeps tire wear low. This increases the efficiency of the machine.
• During normal operation the differential lock is deactivated, this provides safety, low wear and, as a result, saves in operating costs.

Optimum tires

• The right tires for a machine play an important role in practical application. If the tires are matched to the ground and the application, the operator can work optimally with the machine.
• Selecting the right tires ensures maximum traction as well as minimum wear and a pleasant running smoothness of the machine. These aspects also increase the service life of the tires and at the same time increase economic efficiency.
• To achieve optimal performance on any subbase the following different treads are available, depending on the model: EM tread, AS tread, SureTrax tread, RP tread, and MPT tread. This already ensures ex works for maximum flexibility in the machine configuration.

Compact and powerful

• The telehandler is impressive with its optimal relationship between lift height, compact dimensions, and powerful machine performance. This combination in such a compact machine is unique.
• With the all wheel steering, 4-wheel drive and one-piece frame, it is completely stable and well-equipped for many different tasks. The low centre of gravity of the machine also increases the stability.
• Precisely when its tight, for example in work passages in storage sites or in tight construction sites, the telehandler comes into its won with its small radii and optimal maneuverability.

Compact telehandler

• The compact Wacker Neuson telehandlers are unique in their combination of lift height, width and machine capacity. With the all-wheel steering and all-wheel drive, you are absolutely stable and well-equipped for many different tasks.
• Thanks to the all-wheel steering and the single-piece chassis, the Wacker Neuson telehandlers are particularly maneuverable and very stable. The low center of gravity of the machine also supports the stability.

Demand-driven performance

• Two separate electric motors are used in the machine: one for the traction drive and one for driving the working hydraulics. This minimizes energy consumption because power is only utilized when it is actually needed.
• The electric motor for the traction drive also enables the machine to start up dynamically and powerfully. This can be felt with every acceleration process.

20/25 km/h Travel speed

• Optionally available is a speed increase to 20 km/h and/or 25 km/h.
• 20 km/h Speed increase: Ideal compromise between battery running time and the fast movement during transportation.
• 25 km/h Speed increase: Faster movement of the machine from A to B with corresponding time-saving.

Always the Right Running Time

• Depending on the size of the battery, it is possible to achieve a running time with uninterrupted operation of over 5 hr. The running times of the battery are therefore strongly dependent on the respective application conditions, the task, and the driving style. This may also mean that a significantly longer running time can be achieved. However, the running time may also be undercut in extreme cases.

Work efficiently

• Efficiency is one of the most important characteristics that machines should have for efficient application. That’s because the faster and more timesaving a machine maneuvers, the higher is its work output.
• For Wacker Neuson machines, economy means technically sophisticated solutions, such as powerful drive, strong tear out forces, high maneuverability, distinguished stability, and an efficient quick-hitch system for attachments.
• Other factors that speak well for the economic efficiency: low wear, high-quality powder coating, reinforced bolts, good service access, high cylinder speeds, and flexible travel speeds.

Consistent operating philosophy

• There is a consistent operating concept with clearly categorized and ergonomically organized switches and keypads within each Wacker Neuson machine. In terms of the style, all machine can be operated very similarly, if not the same. This has the benefit that an operator is able to quickly familiarize themselves with different Wacker Neuson machine and is able to work productively.
• The Wacker Neuson operating philosophy provides the operator with a simple understanding of the machine, whereby they are able to orientate themselves well and work safely. This can be seen, for example, in the recurring elements, like the jog dial, joystick, display, general switch positioning, etc.

Pressure release on the telescopic boom

• The button for the pressure discharge is easy to access outside on the telescopic arm. In this way, different hydraulic attachments can be replaced even faster and more efficiently. This also occurs with a running engine (diesel) or a switched on machine (electric).
• When the pressure relief is activated, the active hydraulic control circuit is depressurized and hydraulically operated attachments can be changed effortlessly and safely.

Low operating costs

• The operating costs over the duration of the machine’s service life are reduced significantly for an electrically-driven machine when compared to those of a diesel-driven machine, because less energy and service costs are incurred.
• The somewhat higher investment costs are recouped for a completely electrically-driven machine after a certain time of an average service life duration, depending on the usage behavior and the area of application. The purely electric drive is viewed as the most cost-effective alternative in the long run.

Oil volume adjustment

• The oil volume of the 3rd control circuit can be variably adjusted. This enables the adaptation of the machine to the requirements of hydraulic attachments with rotary consumers.
• The oil volume adjustment guarantees that working with the machine and attachment is both comfortable and efficient.

Different operating modes

• The TH412e is equipped as standard with two different operating modes, which can be changed at the press of a button.
• POWER mode: Usual drive system function, no reduction in rpm or restrictions.
• ECO mode: With this mode, acceleration is curbed and the top speed is reduced. Furthermore, the volume flow of the work hydraulics is reduced. This allows for a longer running time of the battery and is ideal for light to medium loading activities, transportation works and driving on streets.

The telehandler as an equipment carrier

• Telehandlers are used for a huge range of jobs, and Wacker Neuson offers an equally extensive portfolio of attachments. With our comprehensive and well thought-out attachment range, you can turn any model into a multi-functional all-rounder.
• The “telehandler” investment can be used in a vast number of task fields, and as a result, it is very economical.
• The machine can be used all year round (e.g. even for winter service), relying on many different attachments depending on the application.

Variety of equipment

• Wacker Neuson machines have an extensive and high-quality range of standard components. In addition, the engine, drive, operator's station, and hydraulics can be individually configured depending on application and model. It is always guaranteed that the machine will be right for the individual demands and preferences of the customer.

Transport on car trailer

• Save time and transport costs: The machines can be easily transported on a car trailer thanks to compact dimensions and low weight.
• The lashing points are optimally attached to the machine. This ensures that transport lock can be carried out in accordance with standards.
• Depending on the machine type and equipment, transport can also include the attachment.

Flexible trailer operation

• The machine can tow a trailer with the optional ball hitch. Depending on the model, there is an automatic ball hitch or a trailer device ball hitch K50 available. In doing so, the weight of the trailer complies with the machine’s size and/or the machine weight.
• The ability to tow a trailer expands the machine's range of applications and offers more flexibility, as no additional towing vehicle is needed. This makes the machine multifunctional.
• The option to tow a trailer is extends the application range of the machine and provides more flexibility because an additional towing vehicle is not required. The machine can be used multi-functionally.

Rear hydraulic connections

• The telehandler can be equipped with hydraulic connections (simple or dual-acting) on the rear. As a result, the application possibilities for the machine are expanded, because the hydraulic rear attachment or the tipper trailer can be operated.
• The machine can be used multi-functionally for different activities. No additional vehicles or machines are required.

Front and/or rear electrical connections

• The machine can be equipped with electrical connections at the front and/or rear. As a result, electrically-operated auxiliary functions of attachments (e.g. a sweeping machine with water-spray facility) can be operated. Additionally, it is possible to switch between the additional function of hydraulic attachments. Operation is therefore comfortable using the joystick.
• The electric functions (push/lock) can be individually assigned to the joystick controls if desired.
• Electrical connections at the front and/or rear ensure that a wide range of attachments can be operated with the machine. This in turn increases the range of applications of the machine.

Pressureless return including leakage oil line

• Certain attachments with their own hydraulic motor require an unpressurized return line. The hydraulic oil flows back into the hydraulic oil tank via the oil cooler and the oil filter in a large dimensioned separate line. The advantage here is that the attachment can feed the return oil cooled and without increased stagnation pressure back into the hydraulic oil tank. This protects components of the machine and the attachment.
• The leakage oil line returns the leakage oil of the oil motor to the tank with max. 2 bar if required. This minimizes the casing pressure in the hydraulic motor of the attachment.

Three types of steering for maximum flexibility

• 1. All-wheel steering: full manoeuvrability and control in the smallest area.
• 2. Front-wheel steering: for safe driving, even at higher speeds.
• 3rd Crab steering: sideways driving for ultra-precise manoeuvring in tight spaces.

Efficient attachment use

• The machine can be used in stationary operation. In doing so, the machine stands in a position and the work hydraulics of the 3rd control circuit are used to drive an attachment, like a log splitter. With this, the application range of the machine is extended.

Efficient change of attachments

• Thanks to the hydraulic quickhitch system, attachments can be readily exchanged. In this way, your machine is immediately ready for use again. This increases productivity and profitability.
• The good view of the coupling points makes changing attachments very easy. Also, changing over is particularly safe with 2-hand operation when decoupling.
• The hydraulic quickhitch system for attachments is available as standard for the Wacker Neuson telehandlers.

Adjustable steering wheel and steering column

• The height and tilt of the steering wheel and steering column can be adjusted individually over a wide range. This allows operators to work in a very ergonomic and concentrated manner, with the settings that suit them best.

Ergonomic joystick

• The joystick lies securely and comfortably in your hand. As a result, control is direct and sensitive at the same time. In this way, the operator always has the machine and its key functions under control.
• Alongside the standard functions, like selecting the travel direction and the speed, other functions, e.g. the differential lock, the 3rd and 4th control circuit, High-Flow, and all electrical functions, can be operated using the joystick, depending on the model. This enables the comfortable one-handed operation of attachments.
• Concentrating the most important function on the joystick ensures comfortable working even over longer periods of time. This also increases overall efficiency when working with the machine.

Ergonomic cockpit

• Plenty of legroom, clearly arranged operating elements, comfortable operator’s seat, and optimal view of the attachment: A working area that motivates and fully supports the operator.
• Well-tuned equipment increases the comfort for the operator. He can also work optimally with the machine for longer periods of time.

Comfortable working environment

• The efficiently designed heating and ventilation system with fan, fresh air filter and well-placed air nozzles keeps the cab in a comfortable working climate.
• There are always sufficient air nozzles installed in the different cabin versions, which provides good air circulation, and the working climate is therefore comfortable for the operator.

Ventilation as required

• The cab has a large, wide-opening door and opening windows. With the two-piece door, the upper window pane can be opened up and affixed on the back. Gap ventilation through the window and/or door is likewise possible. Depending on the model, it is also possible to open the rear windshield and the whole door, which in turn can be affixed to the back.
• The different ventilation options ensure fresh air in the can, even without the use of air-conditioning, and increase the operator’s comfort when ambient temperatures are warm.

Comfortable and ergonomic operator's seat

• The driver's seat is ergonomically shaped, well sprung and adjustable. The optional air sprung comfort seat offers even more pleasant conditions. Seat heating is available for cold temperatures. This increases the comfort for the operator. He can thus concentrate on working with the machine for longer periods.
• Depending on the model, different seats are available to match the size of the machine. The various seat adjustment options allow individual settings for the operator, providing optimum comfort.

Manual throttle

• The hand throttle enables the manual setting of a constant travel speed. In doing so, the foot pedal need not be operated. The variable setting is both comfortable ad precise via a corresponding potentiometer.
• The set travel speed can be overridden with the foot pedal. If the pedal is then released, the machine will return to the set speed.
• The hand throttle ensures comfortable and concentrated work with attachments such as a sweeper, hedge trimmer or mulcher, even over longer periods of time.

Flat-Face Hydraulic Couplings

• Easy change of attachments: The flat-face hydraulic couplings can be cleaned easily, ensuring less soiling in the entire hydraulic system. When the hydro connections are coupled, hardly any leaking occurs, keeping hands, the machine, the attachment and the ground clean.
• With the flat-face hydraulic couplings, hydraulically operated attachments can be coupled even under pressure, which saves time. All coupling types are mounted on the same bulkhead and are thus easily accessible.

Comfortable Cab

• The cabin is very spacious and ergonomically designed for a machine of these compact dimensions: A well thought-out heating design with electrically heated front, side and rear windshield, as well as the optional roof panel heating ensures a comfortable climate, even in the colder months. An optionally available heated seat increases the operator’s wellbeing.
• In addition to this, the door’s window and rear windshield can be opened for ventilation. The upper door window can be opened completely and can be locked to the rear of the cabin.

Good illumination of the work area

• Lighting can be adapted to various requirements depending on the model: Halogen lighting, lighting according to Road Traffic Regulations (StVZO) (halogen or LED), LED lighting (normal or performance), rotating beacons and additional headlights on the telescopic arm. This makes customised work with the machine possible, even in the dark.
• Good illumination of the work area increases work safety and provides the operator with a longer period of time to work with the machine fatigue-free.

Easy entry and exit

• With a few steps, the operator can get into the machine's cabin comfortably. This enables a generous entry area close to the ground, and easily-reachable handles. This increases the safety of the operator when entering and exiting.

VLS (Vertical Lift System)

• The VLS (Vertical Lift System) is a driver assistance system that makes the work easier for the operator when lifting or lowering loads by extending and retracting the telescopic boom semi-automatically when lifting and lowering, respectively, without the operator having to additionally control the telescopic function. This makes smooth and quick work possible.
• The almost vertical lifting and lowering movement also makes the telehandlers with VLS very stable since the load does not reach the overload range. Experienced drivers can work faster and more safely with VLS. Less experienced drivers receive valuable support for lifting and loading work.
• The VLS (Vertical Lift System) can be used in three different modes: Bucket mode (e.g. for load works with bulk materials), stacking mode (e.g. for stacking work with pallets), and manual mode (e.g. for shunting work). This provides maximum flexibility when in use.

Perfect visibility upwards

• A telehandler's advantages come into play when it comes to stacking the load high. Upward visibility is also crucial in order to securely place the load at a great height. With Wacker Neuson telehandlers, the cabin and windscreen are designed so that the operator always has the load in view, even at maximum lift height. The three windscreen wipers (front, rear and roof) ensure optimal visibility at all times.

Excellent all-round visibility

• The cabin provides an excellent overview of the attachment, the immediate working area, and the entire machine surroundings. The deep side window on the right and the high seat position combined with the sloping engine hood ensure optimum visibility. This increases safety in the entire working area of the machine.
• Thanks to the wide front and roof window, there is always an upward view of the attachment. This is particularly important when working effectively and safely at height with the telehandler.

Good visibility to the right

• The view to the right is often insufficient with many telehandlers. With Wacker Neuson, this is guaranteed through the large-sized right window, the low positioning of the telescopic arm and the steeply sloping engine hood. The operator always has an optimal view of the area to the right of the machine and of the right mirror. This increases safety in the entire working area of the machine.

Battery-Management-System (BMS)

• The lithium-ion battery is optimally monitored via the applied electronics system. The Battery Management System (BMS) also enables clearly increased charging current, a short-term provision of performance peaks, and permanent monitoring of the temperature. The battery is also always pre-heated to the optimal operating temperature.
• The Battery Management System (BMS) therefore increases efficiency and safety of the battery, and excludes the possibility of a deep discharge.

Blue Safety Light

• The Blue Safety Light is an optical reversing warning system. It is activated automatically when reverse gear is engaged and projects a blue light spot onto the ground at some distance.
• Despite the lack of engine noise, people in the danger zone can still be aware of the machine and remove themselves from the danger zone.
• The Blue Safety Light therefore increases the level of safety when reversing an eMachine with little noise.