3rd control circuit proportional incl. continuous function via switch incl. Proportional telescopic function (operation: Via scroll wheel in front on the joystick)
vls (vertical lift system) with additional manual mode
Pressureless return line in front (1 x Flatface size 3, plug) incl. leakage oil line (1 x Flatface size 2, plug)
Quick coupling Faster 2-fold - machine side
Quick coupling Faster 2-fold - machine side + attachment side
Quick coupling Faster 2x 2-fold - machine side
Quick coupling Faster 2x 2-fold - machine side + attachment side
Reversing valve in front on 3rd control circuit (3rd control circuit with 4 couplings Flatface size 2)
Pressure release of 3rd Control circuit in front on telescopic arm
Rear hydraulic connection double-acting via change-over valve (two couplings SVK size 3), (3rd control circuit in front or rear, operation: Via switch (0 - 1) + 3rd control circuit).
Lithium-ion battery 28.0 kWh 96V
On-board battery charger up to 6 kW (AC)
Charger connection cable (type 2 on the machine, multiple options available)
Protective contact mains plug (SchuKo) 230V/10A, is pre-selected, Can opt out of this if no charging cable or a different charging cable is required
CEE, 3-pole, 230V/16A (blue)
CEE, 5-pole, 400V/16A (red)
Type 2 (IEC 62196)
Adapter set EU (Schuko, CEE 3-pole, CEE 5-pole)
Battery charge release
Lockable charge enabling
front
Front socket 13-pole, (2x electrical functions E1/ E2 and lighting), operation: Via 2 buttons on the joystick; 1st Pressing function, 2nd Latching function
Front socket 13-pole, (2x electrical functions E1/ E2 and lighting), operation: Via 2 buttons on the joystick; 1st Latching function, 2nd Momentary function
Front socket 13-pole, (2x electrical functions E1/ E2 and lighting), operation: Via 2 buttons on the joystick; 1st Pressing function, 2nd Momentary function
Front socket 13-pole, (2x electrical functions E1/ E2 and lighting), operation: Via 2 buttons on the joystick; 1st Latching function, 2nd Latching function
Rear
Rear socket 3-pole, (2x electrical functions E3/ E4, can be switched to front), operation: Via switch; 1st Latching function, 2nd Latching function
Thank you
Thank you, your request has been sent successfully