WL25

Wheel Loader WL25

Standard Components

  • Perkins 403 J-11, 18,4 kW / 25 HP, Stage V
  • Hydraulic articulated pendulum steering, pendulum angle ± 12°
  • Steering cylinder: 1
  • 10 - 16.5 EM ET0
  • Hydrostatic all-wheel drive system, travel direction can be chosen via joystick
  • Operating brake: Drum brake (combined with parking brake)
  • Central service and parking brake in the drive train acts on all 4 wheels
  • 3rd Control circuit front DN10 incl. single detent, operation via lever
  • Hydraulic oil cooler
  • Floating position for lift and tipping cylinders
  • Lock for steering valve
  • Operator's canopy with ROPS / FOPS tested restraint system, operator's cab can be tilted to the side
  • Fully suspended comfort seat with safety belt, weight, back and height adjustment, 60 mm spring travel
  • Adjustable steering column
  • Right armrest
  • Work lights, 2 in front and 2 in rear
  • Operating hour meter
  • Fuel display
  • Hydraulic quickhitch system for attachments
  • Lighting equipment according to StVZO (road traffic licensing regulations)
  • Lockable tank cap
  • Cast rear counterweight
  • Bolt self-loading equipment

Options

  • Fold-down operator's canopy eps (working lights: 1 in front on loading swing arm and 1 in rear)
  • 2-door cab, including heater and fan (working lights: 2 in front 2 in rear)
  • Radio-ready (antenna, speaker)
  • Complete radio
  • Artificial leather seat; heated seat
  • Artificial leather seat; air cushioned
  • Artificial leather seat; air cushioned; heated seat
  • Fabric seat (standard with cab)
  • Fabric seat; heated seat
  • Fabric seat; air cushioned
  • Fabric seat; air cushioned; heated seat
  • One additional working light on the loading swing arm
  • LED work lights, 2 in front, 2 in rear
  • Rotating beacon (yellow) (National regulations must be observed!)
  • Rotating beacon (yellow) with magnetic base
  • Individual operating permit > 25 km/h
  • Registration plate mounting
  • Engine pre-heating (coolant) 230 V
  • Axle T94, hydrostatic medium pressure all-wheel drive, 20 km/h (transfer case, universal joint shaft, differential lock 100%)
  • Hand inching (low-speed control)

Tires and options axle T94

  • 31x15.50-15 AS ET0
  • 31x15.50-15 AS ET-37
  • 27x10.50-15 EM ET60
  • 31x15.50-15 EM ET0
  • 31x15.50-15 EM ET-37
  • 10.0/75-15.3 ET40 Mitas M159
  • 10.0/75-15.3 RP ET-5
  • 31x15.50-15 RP ET0
  • 10-16.5 Sure Trax ET0 BKT
  • 10-16.5 Sure Trax ET40 BKT
  • 260/70 R16.5 ET-60 Michelin BIBSTEEL Hard Surface
  • Chassis elevation (+30 mm)
  • Turned

Water filling valves without filling (front wheels)

Water filling valves without filling (rear wheels)

Water filling valves without filling (front and rear wheels)

Water filling valves with filling (front wheels)

Water filling valves with filling (rear wheels)

Water filling valves with filling (front and rear wheels)

  • Loading system low front vehicle for increased tipping loads (lifting height 2530 mm)
  • Loading swing arm damping
  • Lowering brake valve (hose burst valves for lift and tipping cylinders)
  • Bucket status display
  • Skid steer mechanical
  • Skid steer hydraulic
  • SMS hydraulic

Editions

  • Operator's canopy; fold-down eps
  • Reversing alarm (acoustic)
  • Rotating beacon (yellow) with magnetic base
  • 2-door cab, including heater and fan
  • Fabric seat
  • 3rd comfort control circuit, including single notch on lever for 3rd control circuit
  • Unpressurized return in the front
  • Hand inching
  • Outlet in front, triple-pole for dual function
  • Loading system low front vehicle
  • Floor plate counterweight (97 kg)
  • Reversing alarm (acoustic)
  • Rotating beacon (yellow)

Contact us

* Mandatory fields